Furniture Care

Blow Molded Resin Folding Table Care
All metal is painted with strong durable "powder-coat" paint. If the paint should chip, sand the area lightly. Then paint over that area with rust proof primer followed by an enamel spray paint.

Soap and water is recommended for cleaning the stain-resistant high-density polyethylene blow molded top. Stubborn stains can be removed with a soft bristle brush and non-abrasive cleaner.

Keep this table looking new for years to come by avoiding contact with abrasive surfaces.

Always be cautious with hot items. This plastic can be permanently deformed if excess heat is applied. Always protect the tabletop from direct heat.

Plastic Folding Chairs
Mild soap and warm water is recommended for cleaning plastic folding chairs. Thoroughly dry the chair after cleaning. Abrasive cleaners are not recommended.

Vinyl, Fabric and Metal Folding Chairs
A damp cloth is recommended for cleaning vinyl, fabric and metal folding chairs. Thoroughly dry the chair after cleaning. Abrasive cleaners are not recommended.

Acrylic Lectern Care

1. Do not clean with Windex or any other product containing ammonia. Mild soap and a soft sponge or chamois is recommended as a way to transport water to the acrylic.
2. Use your hand to remove any dirt or debris. Dry with a clean, damp chamois.
3. Do not overtighten the screws on the base and reading surface - if you do, the acrylic may crack.
4. Do not lean heavily on the reading surface when speaking.
5. When moving your acrylic lectern, it is best that you use a dolly and wrap the lectern with a padded cloth.
6. Do not pull the lectern from the reading surface or drag it across a wooden or carpeted floor as this may cause spidering or cracking around the connection points.